Ozone Generator - Timer Issues

Replace Timer Switch:

1. Remove the original switch from the device; just pull the switch straight.     

      2. Insert the new switch; push straight. 

Replace Timer:

      1. Remove the screws; take the out shell off. After all, users can see that there is a black instrument; that’s the timer.   

      2. Remove the screws which hold the timer.  

                  

      3. There will be two red lines for timer. One is connected to the power socket; another one is connected to other wires. Disconnect them; users can take the timer off.

                         

     4. Connecting the new timer to power socket and other wires. In addition, to screw on the timer.

                         

     5. Put the out shell back and screw it on. Finished.